Single track longitudinal infeed LTB


image/gifBecause of its specific construction, the universal automatic longitudinal infeed LTB is suitable for infeeding blisters as well as slightly larger single pieces, such as cakes. 

The LTB replaces chain belts such as the LT7.EV and is equipped with an accumulating belt, which has a configuration of indirectly driven conveyor rolls, thus a thrust-free accumulating conveyor is created. This prevents excess thrust. The small rolls with an external diameter of 35 mm are made of a plastic that barely sticks. The accumulating conveyor belt turns in one direction and the speed can be regulated. 

The conveyor belt has anodised side guide rails which can be adjusted width-wise. The infeed products are positioned automatically taking into account small deviating lengths; the individual length of each product is determined for this. With this sort of automatic infeed of products there are no start/stop movements in the product flow and the products are fed in continuously.

The electronic computer-controlled longitudinal infeed is equipped with electronic speed regulation and 32 product programmes. The settings can be saved in combination with the pre-positioned infeed systems, if required.

Specific features: 

     •   Universal longitudinal infeed system can be connected to any flowpacker.
  •   Equipped with accumulating conveyor belt, ensuring very low thrust on the products.
  •   For slightly larger products as well as for blister infeed.
  •   Capacity up to approx. 100 products per minute.
  •   Computer controlled, electronically regulated.
  •   32 individual product programs can be expanded to 64.
  •   Automatic adaptation of infeed speed and positioning time when switching to another product.
  •   Automatic correction for deviations in product length or changing speed.
  •   Complete automatic infeed to flowpacker.